Home Products Contact Us How to Pay SUPPORT Become our fan on Facebook  
You are here : Home > Products > USB2.0/3.0/3.1/Type-C™ > 42571
Products
Item No. 42571 Delock External Enclosure 2 x mSATA > USB 3.1 Gen 2 with RAID
 
 
Description :
  The aluminium enclosure by Delock enables the installation of two mSATA SSD, which can be connected via USB Type-C™ to the PC or laptop. When using more than one SSD, there is the possibility to use different RAID level.

Note
The package contains the cable USB-C™ male to USB Type-A male. This can also be used only in this direction. Therefore the USB-C™ male must be connected to the computer and the USB Type-A male to the enclosure.
Optionally there is a cable from Delock USB Type-A male to USB Type-A male (83981), so that this enclosure can also be connected to a computer with USB Type-A interface. In addition, there is the possibility to connect a power supply if the power from the USB port is not enough.
Specification :
  • Connector:
 external:
  1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female
  1 x 5 V DC jack
 internal:
  2 x mSATA slot (full size)
• Chipset: Asmedia ASM1352R
• For 3.3 V mSATA module
• Supports RAID 0, 1, SPAN, Port Multiplier
• RAID mode set by DIP switch on board
• Data transfer rate up to 10 Gbps
• Enclosure with full-PCB
• Colour: silver
• Dimensions (LxWxH): ca. 110 x 80 x 16 mm
• Hot Plug, Plug & Play

Specification of the power jack
• 5 V, ground outside, plus inside
• Dimensions:
 inside: ø ca. 1.35 mm
 outside: ø ca. 3.5 mm
 length: ca. 8.5 mm
• Optional power supply: Navilock 41337
System Requirements :
  • Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.6, Mac OS 10.12
• PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port
Package Content :
  • External enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 50 cm
• Cover, screwdriver, screws
• User manual
Package :
  • Retail Box
Your Reliable Partners
Your Reliable Partners